• They are manufactured in types J, K, S, R, T, E, PtRh PT-PT-10% and 13% PtRh mounted simply with porcelain insulators and block.

• They are made simply with porcelain insulators, or complete with head and tube protection. Some mounts have threaded attachment process.

• Can be of type PT-100 OHMS will 0GC Nickel: 100 ohms at OGC (NI) or 25 ohm copper will OGC (CU).

• Thermocouple or bulbs fitted with thermowell machined stainless can be fixed with threaded or flanged.

• Used in situations of greater wear and have the advantage that they can be replaced without stopping the process.

• Drivers used in special facilities of the thermocouples and bulbs, have the same alloy used in the sensors.

• Normal Type of stock: K (cromel-Alumel), J (iron constantan) Copper Constantan, Cromel Constantan, Platinum, PT-PtRh 10%, 13% PT-PtRh.

• Gauge AEG: 16,18,20 e24.

• Area CHAMBER: 2x0, 22, 2x0, 5, 2X0, 75, 2X1,   5MM.

Covers materials from Internal / External:

• PVC/PVC- Glass Wool Glass Wool with Metal Cover.

• Teflon / Teflon - Silicone / Glass Wool with Metal Cover.

• The 82000 series for head mounting, allows a wide selection of ranges simply making a connection at the top of the transmitter. This saves time since the transmitter need not be disassembled. The transmitter can always get a new scale of operation on site! Accurate calibration using zero and span potentiometers, which operate independently.

The electronics are selective in a rugged metal housing.

• The 82000 series is available for RTD (PT-100 will 0GC OHMS) is linear in temperature and linearized version for thermocouples is in tension.

• They are manufactured in types J, K, S, R, T, PT-PtRh 10%, PT-PtRh 13%, single or double, complete with mounting head, protective tube and the fixing process by threaded or flanged.

• They are made so that the cable connection, direct output of the sensor has to connect to the controller or temperature indicator. They have protective tube and the process by setting screw or bayonet.

• Can be of type PT-100 OHMS will 0GC Nickel: 100 ohms at OGC (NI) or 25 ohm copper will OGC (CU).

• Machined from a billet of stainless or brass, can be either straight or tapered, fixed by threaded or flanged.

• They are manufactured in types J, K or T fitting with bayonet or screw fixation for the process. Some types of mounting have protective tube with output for direct cable connection.

Are manufactured for use in motor windings in the coils of the rotor and stator and transformers, are the main characteristic of being very thin and flexible, direct output of the sensor cable insulated flexible Teflon.

Below are some standard measures:

• 2x8x250mm (thickness x width x length).

• 2x8x200mm (thickness x width x length).

• Other measures on request, cable length can be according to need in the process.

• They are manufactured in types J, K or T, have the sheath filled with magnesium oxide type flexible mounts or head.